Skip to content

Holmenkol

BASE LIQUID WAX SET WARM 2X100ml

78,00 $ CAD

Title

Free shipping on orders over $200

Free shipping is available for all purchases of $200 and more across Canada. For orders of $199.99 or less, a flat shipping rate of $15 applies (excluding Yukon, Northwest Territories, and Nunavut).

Learn more

In-store pickup: ready within 24 hours

You can choose the in-store pickup option to collect your order free of charge at our shop located at 1963 Chemin du Village, Mont-Tremblant, QC, J8E 1K4.

Easy returns within 30 days

You have 15 business days following the receipt of your order to request an exchange or a refund.

Full policy

Questions?

Do you have any remaining questions or concerns? Don't hesitate to write to us to get your answers.

Contact us

Proudly Canadian-based company

Description

Basic liquid wax set for warm/mild conditions (2 x 100 ml) (also sold as Basic Set Hot).
  • Alpha Mix Liquid (yellow, 100 ml): Wax designed for fresh, soft and fine-grained snow at temperatures of 0 °C to -4 °C.
  • Beta Mix Liquid (red, 100 ml): All-purpose wax for all types of snow at temperatures of -4 °C to -14 °C.
  • Accessory included: Includes a Finish Cork block to help the wax penetrate and polish the base according to

How to apply (step by step)
Apply at room temperature (ideally around 15 °C to 20 °C) in a well-ventilated area:
  1. Clean and dry the base. Make sure the base of your skis or board is clean, dry, and free of dust or old wax residue.
  2. Apply the liquid wax. Shake the chosen bottle well according to the snow temperature. Spread a thin, even layer over the entire length of the base using the built-in applicator (or a Care Fleece non-woven cloth).
  3. Let dry. Wait approximately 10 to 15 minutes at room temperature until the liquid has completely evaporated, leaving a light matte white film on the base.
  4. Polish with cork. Rub the base firmly from the tip towards the heel with the included Finish Cork block. The friction generates slight heat that helps the wax penetrate the pores of the base.
  5. Brush (optional). For optimal glide, pass a soft nylon or horsehair brush from the front to the back to clear the base structure.