Skip to content

Holmenkol

SYNTEC FF21 BAR 150g

136,00 $ CAD

Title

Free shipping on orders over $200

Free shipping is available for all purchases of $200 and more across Canada. For orders of $199.99 or less, a flat shipping rate of $15 applies (excluding Yukon, Northwest Territories, and Nunavut).

Learn more

In-store pickup: ready within 24 hours

You can choose the in-store pickup option to collect your order free of charge at our shop located at 1963 Chemin du Village, Mont-Tremblant, QC, J8E 1K4.

Easy returns within 30 days

You have 15 business days following the receipt of your order to request an exchange or a refund.

Full policy

Questions?

Do you have any remaining questions or concerns? Don't hesitate to write to us to get your answers.

Contact us

Proudly Canadian-based company

Description

SYNTEC FF21 Wax (150 g)

  1. Description and features
    • Snow temperature range. It covers variable conditions from 0 °C to -20 °C, including natural, artificial, icy, or wet snow. 
    • Fluor-free formula. It complies with International Ski Federation (FIS) regulations. 
    • Durability and cleanliness. It offers high abrasion resistance for long distances and limits the adhesion of dirt to the base. 
    • Versatility. It serves as a base wax for preparing skis or as a race and training wax on its own. 
    Application steps
    1. Base cleaning. Brush the clean and dry base from the tip to the tail with a fine bronze or steel brush to open the structure.
    2. Iron setting. Set a waxing iron between 140 °C and 150 °C and wait for the temperature to stabilize.
    3. Wax application. Melt the wax on the base of the iron to deposit a thin layer of wax, then pass the iron slowly from the tip to the tail in one continuous motion without overheating the base.
    4. Cooling. Allow the ski to cool completely to room temperature for at least 20 to 30 minutes so that the wax hardens properly.
    5. Scraping. Scrape off all excess wax using a well-sharpened plexiglass scraper by pushing from the tip to the tail. Do not forget to clear the center groove on cross-country skis.
    6. Final brushing. Brush firmly from the tip to the tail with a horsehair or stiff nylon brush to reveal the microstructure and polish the base